Front & Rear Brake Rotors + Brake Pads for Hyundai Elantra Veloster Kia Forte

  
HYUNDAI ELANTRA 2011 - 2012 SEDAN MODELS(L4 1.8L). HYUNDAI ELANTRA 2013 - 2016 All Models. HYUNDAI ELANTRA COUPE 2013 - 2014 All Models. HYUNDAI ELANTRA GT 2013 - 2016 Built Before 06/29/2015. HYUNDAI VELOSTER 2012 All Models. HYUNDAI VELOSTER 2013 - 2016 Excluding Turbo Models 2016: Built After 01/26/2015.

KIA FORTE KOUP 2014 - 2016 EX. KIA FORTE 2014 LX & EX Models. KIA FORTE 2015 - 2016 All Models.

KIA FORTE5 2014 - 2016 EX; 11.02 inch (280mm) Front Rotor Diameter. 4pcs Brake rotors+8pcs Brake pads+2bags Brake Grease. Fit For Hyundai Elantra Veloster Kia Forte. Each Slot is strategically machined off the edge of the rotor to dramatically improve braking performance by up to 30% over factory stock brake rotors.

Our slot design removes water, dust, and debris whilst minimizing the heating of the pad surface. Slots that are machined in the center of the pad surface are inefficient and only collect dust.

The edges of our slots are machine-rounded to achieve maximum degassing and dust removal. Each Cross-Drilled hole is perfectly sized to allow for maximum ventilation without structurally weakening the brake rotors. Cross-Drilled Holes move air from the pad surface whilst reducing surface temperature, eliminating hot spots and warping. Each drilled hole is chamfered to eliminate stress cracks, as well as to provide long-lasting performance. Our Performance Rotors are Zinc coated in Black or Silver. The Zinc Coating Process is an extensive hand-applied operation that is not sprayed on like inferior coatings. Each Performance Brake Rotor is immersed in different solution tanks throughout the coating process.

The final result is a thick protective coating that will help prevent rusting and Extended service life. Brake Performance Cross-Drilled and Slotted Brake Rotors are machined to the same fit and dimensions as your factory brake rotors. You can install them with no worries about factory fit or function. We recommend that you have a certified mechanic install them for proper break-in procedure. Cross Drilled and Slotted Brake Rotors are ideal for all domestic and foreign light, medium, and heavy-duty Cars, Trucks, and SUVs, as well as any vehicles that require improved braking performance.

Our brake pads are Engineered to Precise Original Equipment Standards. Vehicle Optimized Advanced Ceramic Formula. Resist to Fade, Rapid Recovery. 100% scorched for easy bed-in.

Positive Molded for even wear characteristics. Longer Pad Life & Strongest Anti-Dust Ability.

100% Dual-Layer 65Mn Steel Shims. Please Use brake grease to lubricate the edge of the brake pad plate where it touches the caliper. Do not put grease on the friction material.

The lubricant goes between the plate and the piston or caliper back. After installing the brake pads, please remember to step on the brake pedal several times before starting to ensure that the excessive clearance caused by the installation is completely eliminated. Please make sure you have read through the whole listing and paid attention to "note" and "notice". If you require any additional help with our products, please feel free to send us a message. Our customer service representatives are available to assist you from Monday to Friday. If there are any problems with the product you ordered, please send us a message so that we can resolve the issue. We are not responsible for any wrong or undeliverable addresses. If everything is satisfactory, we would be very much appreciated when you leave us 5 stars????? Items must be new, uninstalled, in original box.