Front & Rear Brake Rotors + Ceramic Pads for Dodge Charger Challenger 300 V6

  
Chrysler 300 2005 2006 2007 2008 2009 2010 - 2.7 V6 Engine; 3.5 V6 Engine RWD, Chrysler 300 2011 - 3.6 V6 Engine, Chrysler 300 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 - 3.6 V6 Engine RWD, Dodge Challenger 2009 2010 - 3.5 V6 Engine, Dodge Challenger 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 - 3.6 V6 Engine 320mm (12.60) Diameter Front Rotor, Dodge Charger 2006 - 2.7 V6 Engine; 3.5 V6 Engine 320mm (12.60) Diameter Front Rotor, Dodge Charger 2007 2008 2009 2010 - 2.7 V6 Engine; 3.5 V6 Engine 320mm (12.60) Diameter Front Rotor Solid Rear Rotor, Dodge Charger 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 - 3.6 V6 Engine 320mm (12.60) Diameter Front Rotor, Dodge Magnum 2005 2006 2007 2008 - 2.7 V6 Engine; 3.5 V6 Engine Solid Rear Rotor. 2005, 2006, 2007, 2008, 2009, 2010.

2.7 V6 Engine; 3.5 V6 Engine, RWD. 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021. 3.6 V6 Engine, RWD. 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021. 3.6 V6 Engine, 320mm (12.60) Diameter Front Rotor.

2.7 V6 Engine; 3.5 V6 Engine, 320mm (12.60) Diameter Front Rotor. 2.7 V6 Engine; 3.5 V6 Engine, 320mm (12.60) Diameter Front Rotor, Solid Rear Rotor. 2.7 V6 Engine; 3.5 V6 Engine, Solid Rear Rotor. For your new braking system to operate at its performance capacity, it is important to'break-in' the rotors and brake pads.

This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop.

For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so.

This concludes the bedding procedure and you can now use your brakes normally. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. Nova Scotia, Prince Edward Island, Newfoundland and Labrador, Alberta, British Columbia. Processing time is subject to change depending on holiday schedule & volume of orders. AB, BC, MB, QC, SK.