Front & Rear Brake Rotors + Ceramic Pads for GMC Chevy Yukon XL Avalanche 1500

  

Cadillac Escalade ESV 2003 2004 2005 2006, Cadillac Escalade EXT 2002 2003 2004 2005 2006, Cadillac Escalade 2002 2003 2004 2005 2006 - AWD, Chevrolet Avalanche 1500 2002 - RWD with Center Anti-rattle Clip; 4WD, Chevrolet Avalanche 1500 2003 2004 2005 2006 - 4WD, Chevrolet Silverado 1500 2003 2004 2005 2006 - Dual Piston Rear Caliper, Chevrolet Suburban 1500 2000 2001 - Dual Piston Rear Caliper, Chevrolet Suburban 1500 2002 - RWD Dual Piston Rear Caliper With Anti-rattle Clip; 4WD Dual Piston Rear Caliper, Chevrolet Suburban 1500 2003 2004 2005 2006 - 4WD, Chevrolet Tahoe 2000 2001 - Dual Piston Rear Caliper, Chevrolet Tahoe 2002 - 4WD; RWD with Center Anti-rattle Clip, Chevrolet Tahoe 2003 2004 2005 2006 - 4WD, GMC Sierra 1500 2001 2002 2003 2004 2005 2006 - Dual Piston Rear Caliper, GMC Yukon XL 1500 2000 2001 - Dual Piston Rear Caliper, GMC Yukon XL 1500 2002 2003 2004 2005 2006 - 4WD, GMC Yukon 2000 - Dual Piston Rear Caliper Exc Denali, GMC Yukon 2001 - Dual Piston Rear Caliper, GMC Yukon 2002 - RWD with Center Anti-rattle Clip; 4WD, GMC Yukon 2003 2004 2005 2006 - 4WD. 2002, 2003, 2004, 2005, 2006. RWD, with Center Anti-rattle Clip; 4WD. RWD, Dual Piston Rear Caliper, With Anti-rattle Clip; 4WD, Dual Piston Rear Caliper. 4WD; RWD, with Center Anti-rattle Clip.

2001, 2002, 2003, 2004, 2005, 2006. Dual Piston Rear Caliper, Exc Denali. For your new braking system to operate at its performance capacity, it is important to'break-in' the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation.

Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping.

Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so.

This concludes the bedding procedure and you can now use your brakes normally. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes.

Nova Scotia, Prince Edward Island, Newfoundland and Labrador, Alberta, British Columbia. Processing time is subject to change depending on holiday schedule & volume of orders. AB, BC, MB, QC, SK.