Rear Brake Rotors

Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza


Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza
Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza
Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza
Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza
Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza
Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza
Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza
Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza
Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza
Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza

Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza    Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza

Subaru Crosstrek 2018, Subaru Crosstrek 2019 2020 - 2.0 H4 Engine, Subaru Crosstrek 2021 - 2.0 H4 Engine - 2.5 H4 Engine, Subaru Impreza 2017 2018 2021 - 294mm (11.57) Diameter Front Rotor, Subaru Impreza 2019 2020 - 293mm (11.54) Diameter Front Rotor. 2.0 H4 Engine - 2.5 H4 Engine. 294mm (11.57) Diameter Front Rotor. 293mm (11.54) Diameter Front Rotor.

For your new braking system to operate at its performance capacity, it is important to'break-in' the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times.

Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop.

For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down.

This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. Nova Scotia, Prince Edward Island, Newfoundland and Labrador, Alberta, British Columbia. Processing time is subject to change depending on holiday schedule & volume of orders.

AB, BC, MB, QC, SK.
Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza    Front & Rear Brake Rotors + Ceramic Pads For Subaru Crosstrek Impreza