Honda Accord EX/EX-L and with 2.4L. Honda Accord EX-L and with 1.5L.
Honda Accord EX-L and with 2.4L. Honda Accord EX-L/Touring and with 2.4L.Honda Accord LX/EX/EX-L and with 1.5L. Honda Accord Sport/EX/Hybrid EX-L/Hybrid Touring/Hybrid. If you are still unsure of fitment, the rotors in this kit are 293mm for front and 282mm for rear. If your vehicle is in the list and your rotors diameter are 293mm and 282mm then this kit will work. Your vehicle is not listed?
Search in our store by entering your vehicle year make model and the position you are searching for in the form below. 2 x Front Coated Slotted Drilled Disc Brake Rotor (Both Sides). 2 x Rear Coated Slotted Drilled Disc Brake Rotor (Both Sides).Exclusive Drill and Slot design for left or right installation. Precision Drilled and Diamond Slotted to for maximum heat dissipation. Electrophoretic Coating provides a high corrosion-resistant finish for 360° of protection. Manufactured with multiple alloys for improved heat dissipation and performance. G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation. Precision mill balanced to ensure smooth operation with no pedal pulsation. Smooth Taper Free Finish provides less pad break-in time.
Vapour Corrosion Inhibitor (VCI) bag reduces rotor prep & saves installation time. Quality validated for proper metallurgy and correct brake plate thickness. Interchanges: PR58035, AR58035, 31636, 2164744, YH477745C, YH477745, 120.40084, 121.40084, BR901178, SEE HO-5027, 2488821548, 2488821586, 488821548, 488821586, 7488821548, 7488821586, 901178, 610006, 981022, AHO1019, BHO1019, BD180583E, BD180583, PR31479, AG31479, 31479, 2164654, YH200513C, YH200513, 120.40068, 121.40068, BR900520, BR901464, HO-5012, 248880577, 48880577, 748880577, 900520, 901464, 980577, 982003, BD126414E, BD126414. If you wish further validation, simply copy and paste your vehicle information along with your VIN into the order note.We will double-check it before sending your order. We assume all responsibility for the fitment information of our products. We follow the guidelines set out by Friction Material Standards Institute (FMSI) to ensure the safety of our customers. This means that if the FMSI says a pad number should have no slot or should not be chamfered based on it's size, we will follow their guidelines.
Our customer's safety is our highest priority. All our products follow the OE specifications: there is no modification needed for installation. Do you need any additional information about my vehicle? If you see your vehicle in the fitment list, you don't need to send us additional information, the parts will fit your vehicle, we guarantee it. If you are not sure and would like to double check, send us a message with your vehicle information or VIN and our vehicle specialists will assist you.
The picture does not match my parts. The picture in our listing are the actual image of the specified application, unless specified to be a generic image.