Front+Rear Disc Brake Rotors Ceramic Pads And Drum Kit For Honda Civic

  

Transit Auto - Front Rear Disc Brake Rotors Ceramic Pads And Drum Kit K8C-102566. This product only fits the following vehicles. Honda Civic DX and with Sedan/Coupe and Automatic transmission.

Honda Civic LX and with Manual transmission and 4-Wheel ABS. Honda Civic LX and with Non-ABS.

Honda Civic LX/CX/GX/DX/HX and with Drum rear brakes. Honda Civic LX/CX/GX/DX/Value Package/HX and with Drum rear brakes. Honda Civic LX/DX and with Sedan and Automatic transmission.

Your vehicle is not listed? Search in our store by entering your vehicle year make model and the position you are searching for in the form below. 2 x Front Disc Brake Rotor (Both Sides).

2 x Rear Brake Drum (Both Sides). 1 x Front Ceramic Disc Brake Pad Set. 1 x Rear Drum Brake Shoe Set. Premium Semi-Metallic Pads / Brake Shoes / Plain Drum / Plain Disc Rotors (K8F-103185). Semi-Metallic Pads / Brake Shoes / Plain Drum / Plain Disc Rotors (K8S-103402). Ceramic Pads / Brake Shoes / Plain Drum / Plain Disc Rotors (K8T-103673).

Premium Ceramic Pads / Brake Shoes / Coated Drum / G-Coated Rotors (KGC-101969). Premium Semi-Metallic Pads / Brake Shoes / Coated Drum / G-Coated Rotors (KGF-102370).

Semi-Metallic Pads / Brake Shoes / Coated Drum / G-Coated Rotors (KGS-102222). Ceramic Pads / Brake Shoes / Coated Drum / G-Coated Rotors (KGT-102526). Disc Brake Pad / Brake Shoes / Coated Drum / G-Coated Rotors (KGA-104285). Disc Brake Pad / Brake Shoes / Plain Drum / Plain Disc Rotors (K8A-105033). Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation.

Manufactured with multiple alloys for improved heat dissipation and performance. Double disc ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in. Precision mill balanced to ensure smooth operation with no pedal pulsation. Smooth Taper Free Finish provides less pad break-in time.

Quality validated for proper metallurgy and correct brake plate thickness. Rounded radius for added strength. Interchanges: AG31029, CR31029, PR31029, 31029, YH141581C, YH141581, 120.40023, 121.40023, BR31029, HO-526, 24886147, 74886147, 4886147, 125006, Q31029, 96147, BD125006. Double drum ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in.

Interchanges: AG3569, CD3569, PD3569, 35133, 3569, YH140508C, YH140815C, YH140508, YH140815, 122.40009, 123.40009, BD3569, HOD-16, 4401552, 4406663, 60855, Q3569, 9311, 9800, BD180055, BD60855. Exclusive high-density ceramic formula for optimal braking power and quietness.

Our formula provides unmatched braking power in hot or cold weather with optimal pad life. Precision manufactured to meet automotive-industry TS16949 quality certification standard.

Quiet Channel Technology: Advanced materials virtually eliminate the usual noise caused by misalignment. Manufactured using a new technology to ensure a friction consistency and improve braking performance. Interchanges: 7355, 7439, 7178, SG7178X, PF7439M, AD7178, PF7178M, PF7178X, QE7178X, SS7178X, SS7439, UP7178X, D273, 273. TQ OE-matched friction material gives our brake shoe the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation.

Precision ground maximizes friction-to-drum contact. Attached levers & pins included to match OE (on specific applications). Follows original manufacturers' designs for dispersing heat, helping to prolong drum life while reducing noise and vibration.

Quality validated for proper metallurgy and correct brake shoe thickness. If you wish further validation, simply copy and paste your vehicle information along with your VIN into the order note. We will double-check it before sending your order.

We assume all responsibility for the fitment information of our products. We follow the guidelines set out by Friction Material Standards Institute (FMSI) to ensure the safety of our customers. This means that if the FMSI says a pad number should have no slot or should not be chamfered based on it's size, we will follow their guidelines. Our customer's safety is our highest priority. All our products follow the OE specifications: there is no modification needed for installation.

Do you need any additional information about my vehicle? If you see your vehicle in the fitment list, you don't need to send us additional information, the parts will fit your vehicle, we guarantee it. If you are not sure and would like to double check, send us a message with your vehicle information or VIN and our vehicle specialists will assist you.

The picture does not match my parts. The picture in our listing are the actual image of the specified application, unless specified to be a generic image.