Front & Rear Drilled Brake Rotors + Pads for 2005-2009 Subaru Legacy Outback

  
Subaru Legacy 2005 - 293mm (11.54) Diameter Front Rotor, Subaru Legacy 2006 2007 2008 - 2.5 H4 Naturally Aspirated Engine, Subaru Legacy 2009 - 3.0 R Premier - 3.0 R Premier - 3.0 R - 3.0 R - 2.5 H4 Naturally Aspirated Engine, Subaru Outback 2005 2006 2007 2008 2009. 293mm (11.54) Diameter Front Rotor.

2.5 H4 Naturally Aspirated Engine. 3.0 R Premier - 3.0 R Premier - 3.0 R - 3.0 R - 2.5 H4 Naturally Aspirated Engine.

2005, 2006, 2007, 2008, 2009. For your new braking system to operate at its performance capacity, it is important to'break-in' the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times.

Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down.

This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally.

Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. Nova Scotia, Prince Edward Island, Newfoundland and Labrador, Alberta, British Columbia. Processing time is subject to change depending on holiday schedule & volume of orders. AB, BC, MB, QC, SK.