Front & Rear Drilled Brake Rotors + Pads for 2005-2010 VW Jetta Passat Audi A3

  

Audi A3 Quattro 2006 2007 2008 2009, Audi A3 2006 2007, Audi A3 2008 2009 - 282mm (11.10) Diameter Rear Rotor, Volkswagen CC 2009 2010 2011 2012 2013 2014 2015 2016 - FWD, Volkswagen CC 2017 - 312mm (12.28) Diameter Front Rotor 282mm (11.10) Diameter Rear Rotor, Volkswagen Eos 2007 2008 2009, Volkswagen GTI 2006 2007 2008 2009 2010, Volkswagen GTI 2011 - 282mm (11.10) Diameter Rear Rotor, Volkswagen Jetta 2005 2006 2007 2008 2009 2010 - 312mm (12.28) Diameter Front Rotor 282mm (11.10) Diameter Rear Rotor, Volkswagen Passat CC 2009 2010 - 2.0 L4 Engine, Volkswagen Passat 2006 2007 - 2.0 L4 Engine; 3.6 V6 Engine FWD, Volkswagen Passat 2008 2009 - 2.0 L4 Engine, Volkswagen Passat 2010. 282mm (11.10) Diameter Rear Rotor. 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016. 312mm (12.28") Diameter Front Rotor, 282mm (11.10") Diameter Rear Rotor. 2006, 2007, 2008, 2009, 2010.

2005, 2006, 2007, 2008, 2009, 2010. 2.0 L4 Engine; 3.6 V6 Engine, FWD. For your new braking system to operate at its performance capacity, it is important to'break-in' the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times.

Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping.

Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes.

Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally.

Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. Nova Scotia, Prince Edward Island, Newfoundland and Labrador, Alberta, British Columbia. Processing time is subject to change depending on holiday schedule & volume of orders. AB, BC, MB, QC, SK.