Importance of changing your brake disc. When you notice erratic behavior from your brakes, it nearly always means that your brakes need to be serviced immediately. A failure to properly maintain and replace your disk brake system will eventually cause your brake system to fail - and that could have disastrous results.
Failing to change your brake pads or rotors as needed will also cause additional wear and damage to your car over time, which can be quite costly to repair. WHY UPGRADE TO eLINE SERIES VS. Zinc Plated for corrosion protection. All of our eLINE Series Brake Rotors, excluding our blank pattern rotors, come with a special zinc plating designed to protect from corrosion. Though some of this corrosion protection will inevitably wear off through use, the rest of the rotor will remain protected.
This leads to better appearance, longer life, and overall improved maintenance and replacement costs. Our eLINE Series Brake Rotors are available in silver, black, and gold. Please be advised that when you first receive the rotors, they are completely covered with the silver zinc coating. During the initial embedding process, the silver zinc coating on the braking surface, the area where the pads come in contact with the rotors will wear off, leaving only the hub and inner vane structure coated. Includes Shims to Reduce Brake Noise.
For Any Vehicle that Needs that Extra Brake Bite! R1 CERAMIC SERIES BRAKE PADS. Provides long lasting braking power without having the squeal of an actual race pad. Works great on any vehicle that needs that extra brake bite.It doesn't matter if it is quick stops in traffic or that spirited drive down your favorite backroad. YOUR SATISFACTION IS OUR MAIN PRIORITY. Looks great when installed and I definitely feel the braking difference. I'm also loving the look, it gives the car an aggressive touch overall compared to stock. They work great and the price was great. Now I have a great setup, price and quality can't be beat. Arrived a week early -Rob_67. We want to reassure you fitment, excellence in quality, and machined with precision. Please be sure to check vehicle application above to see if these parts will fit you vehicle. Your Satisfaction is Our Main Priority. Shop R1 Concepts Brake Products.
R1 Carbon GEOMET Series Brake Rotors. What conditions are these items in? All our items are 100% brand new.How long does your brake parts last? The life of the brake parts are based on the drivers' vehicle, driving habits, vehicle usage, and environment. To extend the life of your brake parts, make sure you properly install the rotors and follow the bed-in instructions. Will these products require additional modifications or new brake calipers? These items are Original Equipment specifications and will NOT require any type of additional modifications.
However, we do recommend the use of new brake pads. Is there any coating on the drilled or slotted rotors? The coating can be zinc plating, electro-coat, or dacromet. Rotors that do not have coating are those with aluminum hubs and the OE design non-drilled and slotted rotors. Any coating on the braking surface (area where the brake pads come in contact) will come off during braking.The braking surface and the cross drills holes or slots if applicable can develop surface rust over time, depending on weather, climate, driving conditions, or left parked for days. This is perfectly normal with iron casted brake rotors. Any coating done on brake rotors is meant to help against rust. It is not meant to prevent rust indefinitely. Are the rotors and pads images the actual items I will receive? DO NOT CONFIRM FITMENT BASE ON IMAGES. The images are for display purposes. Items may vary from the images due to fitment specification. Fitment is specific and is stated in the listing details.
We advise you to always thoroughly read the fitment details in the listing to ensure proper fitment. The report must indicate exactly which rotor or rotors are warped.A template of a report and required information will be provided upon request. The entire risk as to the quality and performance of any parts is with the purchasers. R1 Concepts makes no warranties whatsoever, express, or implied, oral or written, to purchasers or any user of these parts. Rust can develop anywhere over time on iron cast rotors.
Modern brakes pads are formulated to minimize noise but due to its nature, there is never any guarantee against squealing. Even if you use the same pads on two identical vehicles, one can experience squeaking and the other may not. Brake pad noise does not mean the pads are bad or defective. There are many variables when it comes to noise with brake pads and its occurrence can be completely random.
Why did my items come in unmark boxes (packaging) not like the photos? Actual packaging may vary from image. Cross-Drilled & Slotted Performance Brake Rotors.Which rotor is considered Left or Right side? How to break in new brake rotors and pads? What is brake pad bed-in? Is there a Dust-Free pad?
How can I tell the difference? What is a Diamond Slot Rotor and why it is superior? America's one stop shop for OEM rotors, custom performance rotors, brake pads, and many more braking solutions. R1concepts strives to deliver the highest quality products at low prices with speedy turnaround time.
Aim / Skype / Twitter / Yahoo : r1concepts. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors". The seller is "r1concepts" and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico, South Africa, Bahamas, New Zealand, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay.